[ViewVC] Annotation of: cvs/liblzf/Changes

3.6  Mon Feb  7 17:37:31 CET 2011
        - fixed hash calculation in C♯ version (Tiago Freitas Leal).
        - unroll copy for small sizes, use memcpy for larger sizes,
          greatly speeding up decompression in most cases.
        - finally disable rep movsb - it's a big loss on modern intel cpus,
          and only a small win on amd cpus.
        - improve C++ compatibility of the code.
        - slightly improve compressor speed.
        - halved memory requirements for compressor on 64 bit architectures,
          which can improve the speed quite a bit on older cpus.

3.5  Fri May  1 02:28:42 CEST 2009
        - lzf_compress did sometimes write one octet past the given output
          buffer (analyzed and nice testcase by Salvatore Sanfilippo).

3.4  Tue Sep  2 06:45:00 CEST 2008
        - the fix from 3.3 introduced a compression bug, which is fixed in
          this release (which explains the mysterious prerelease...). Thanks
          once more to Clément Calmels.

3.3  Mon Aug 25 03:17:42 CEST 2008
        - lzf_compress could access memory after the given input buffer
          when outputting back references. reported with nice testcase
          by Clément Calmels.

3.2  Fri May  9 18:52:23 CEST 2008
        - include a workaround for failing POSIX and real-world compliance
          on 64 bit windows (microsoft claims to support POSIX, but is far
          from it). (bug found and analysed nicely by John Lilley).

3.1  Fri Nov 30 11:33:04 CET 2007
        - IMPORTANT BUGFIX: a too long final literal run would corrupt data
          in the encoder (this was introduced in 3.0 only, earlier versions
          are safe).

3.0  Tue Nov 13 22:13:09 CET 2007
        - switched to 2-clause bsd with "GPL v2 or any later version" option.
        - speed up compression by ~10-15% in common cases
          by some manual unrolling.
        - import some compiler tricks from JSON::XS, for further speed-ups.
        - tune hash functions depending on ULTRA_FAST or VERY_FAST settings.
        - for typical binary data (e.g. /bin/bash, memory dumps,
          canterbury corpus etc.), speed is now comparable to fastlz, but
          with better compression ratio. with ULTRA_FAST, it's typically
          3-15% faster than fastlz while still maintaining a similar ratio.
          (amd64 and core 2 duo, ymmv). thanks a lot for the competition :)
        - undo inline assembly in compressor, it is no longer helpful.
        - no changes to the decompressor.
        - use a HLOG of 16 by default now (formerly 15).

2.1  Fri Nov  2 13:34:42 CET 2007
        - switched to a 2-clause bsd license with GPL exception.
        - get rid of memcpy.
        - tentatively use rep movsb on x86 and x86_64 (gcc only) for a
          moderate speed improvement.
        - applied patch by Kein-Hong Man to maske lzf.c compile under
          the crippled mingw32 environment.

2.0  Fri Feb 16 23:11:18 CET 2007
        - replaced lzf demo by industrial-strength lzf utility with behaviour
          similar other compression utilities. Thanks for Stefan Traby for
          rewriting it!
        - fix state arg prototype.

1.7  Wed Sep 27 17:29:15 CEST 2006
        - remove bogus "unlzf" patch.
          note to self: never accept well-meant patches.
        - make lzf more robust in presence of padding bytes or sudden eof.

1.6  Fri Jul  7 17:31:26 CEST 2006
        - the lzf example utility will now uncompress if invoked
          as "unlzf" (patch by Scott Feeney).
        - add CHECK_INPUT option that adds more checks for input
          data validity.
        - help applications that do not pass in the correct length
          (such as php) by returning either EINVAL or E2BIG.
        - default HLOG size is now 15 (cpu caches have increased).
        - documentation fixes.

1.51 Thu Apr 14 22:15:46 CEST 2005
        - incorporated C♯ implementation of both the en- and decoder,
          written by "Oren J. Maurice".
          You can find it in the cs/ subdirectory.
        - make FRST, NEXT IDX overridable if lzf_c.c is directly included
          in the code.

1.5  Tue Mar  8 20:23:23 CET 2005
        - incorporated improvements by Adam D. Moss,
          which includes a new VERY_FAST mode which is
          a bit slower than ULTRA_FAST but much better,
          and enabled it as default.

1.401 Thu Mar  3 18:00:52 CET 2005
        - use cstring in c++, not string.h.
        - change of contact address.

1.4  Wed Dec 15 08:08:49 CET 2004
        - very very slight tuning of the hashing function.

1.3  Thu Mar 25 15:41:17 CET 2004
        - changed license of lzf core code to explicitly allow
          relicensing under the GPLv2.
        - added VPATH support as suggested by Björn Eriksson.

1.2  Mon Dec 29 13:47:28 CET 2003
        - avoid spurious memory accesses after the to-be-compressed
          memory region. originally reported by Michal Zalewski.
        - flip LZF_STACK_ARG meaning (to be correct).

1.1  Tue Dec 23 05:48:32 CET 2003
        - removed #warn directive, it's not worth the hassle.
        - add LZF_STACK_ARG and AVOID_ERRNO configurations
          for embedded systems.
        - make it compile cleanly as c++.
        - some small documentation and code fixes.

1.0  Sun Nov 17 12:37:37 CET 2002
        - slightly better compression ratio, almost unmeasurably
          slower.
        - some documentation fixes.

0.4  Thu Jun 13 14:11:10 CEST 2002
        - typoe fix.
        - lzf demo program now properly decompresses small files.
        - fix another 64 bit issue, found by Laurent Deniel.

0.3  Tue Jan 16 13:21:14 CET 2001
        - fix silly beginners 32/64 bit mistake.

0.2  Thu Jan  4 05:56:42 CET 2001
        - now totally independent of autoconfig, for
          easy inclusion into other programs.
        - much better fine-tuning, faster and better than 0.1.

0.1  2000
        - initial release.
Revision:	1.52
Committed:	Mon Feb 7 16:39:26 2011 UTC (13 years, 3 months ago) by root
Branch:	MAIN
CVS Tags:	rel-3_6
Changes since 1.51:	+2 -2 lines
Log Message:	3.6
#	User	Rev	Content
1	root	1.52	3.6 Mon Feb 7 17:37:31 CET 2011
2	root	1.47	- fixed hash calculation in C♯ version (Tiago Freitas Leal).
3	root	1.48	- unroll copy for small sizes, use memcpy for larger sizes,
4			greatly speeding up decompression in most cases.
5			- finally disable rep movsb - it's a big loss on modern intel cpus,
6			and only a small win on amd cpus.
7	root	1.52	- improve C++ compatibility of the code.
8	root	1.50	- slightly improve compressor speed.
9	root	1.51	- halved memory requirements for compressor on 64 bit architectures,
10			which can improve the speed quite a bit on older cpus.
11	root	1.47
12	root	1.46	3.5 Fri May 1 02:28:42 CEST 2009
13			- lzf_compress did sometimes write one octet past the given output
14			buffer (analyzed and nice testcase by Salvatore Sanfilippo).
15
16	root	1.44	3.4 Tue Sep 2 06:45:00 CEST 2008
17			- the fix from 3.3 introduced a compression bug, which is fixed in
18	root	1.45	this release (which explains the mysterious prerelease...). Thanks
19	root	1.44	once more to Clément Calmels.
20
21	root	1.43	3.3 Mon Aug 25 03:17:42 CEST 2008
22			- lzf_compress could access memory after the given input buffer
23			when outputting back references. reported with nice testcase
24			by Clément Calmels.
25	root	1.41
26	root	1.43	3.2 Fri May 9 18:52:23 CEST 2008
27	root	1.42	- include a workaround for failing POSIX and real-world compliance
28			on 64 bit windows (microsoft claims to support POSIX, but is far
29			from it). (bug found and analysed nicely by John Lilley).
30	root	1.41
31	root	1.39	3.1 Fri Nov 30 11:33:04 CET 2007
32			- IMPORTANT BUGFIX: a too long final literal run would corrupt data
33	root	1.40	in the encoder (this was introduced in 3.0 only, earlier versions
34			are safe).
35	root	1.39
36	root	1.38	3.0 Tue Nov 13 22:13:09 CET 2007
37	root	1.37	- switched to 2-clause bsd with "GPL v2 or any later version" option.
38	root	1.33	- speed up compression by ~10-15% in common cases
39			by some manual unrolling.
40	root	1.37	- import some compiler tricks from JSON::XS, for further speed-ups.
41	root	1.33	- tune hash functions depending on ULTRA_FAST or VERY_FAST settings.
42			- for typical binary data (e.g. /bin/bash, memory dumps,
43			canterbury corpus etc.), speed is now comparable to fastlz, but
44			with better compression ratio. with ULTRA_FAST, it's typically
45	root	1.34	3-15% faster than fastlz while still maintaining a similar ratio.
46			(amd64 and core 2 duo, ymmv). thanks a lot for the competition :)
47	root	1.37	- undo inline assembly in compressor, it is no longer helpful.
48	root	1.35	- no changes to the decompressor.
49	root	1.36	- use a HLOG of 16 by default now (formerly 15).
50	root	1.32
51	root	1.30	2.1 Fri Nov 2 13:34:42 CET 2007
52	root	1.31	- switched to a 2-clause bsd license with GPL exception.
53	root	1.28	- get rid of memcpy.
54			- tentatively use rep movsb on x86 and x86_64 (gcc only) for a
55			moderate speed improvement.
56	root	1.29	- applied patch by Kein-Hong Man to maske lzf.c compile under
57			the crippled mingw32 environment.
58	root	1.18
59	root	1.27	2.0 Fri Feb 16 23:11:18 CET 2007
60	root	1.24	- replaced lzf demo by industrial-strength lzf utility with behaviour
61			similar other compression utilities. Thanks for Stefan Traby for
62			rewriting it!
63	root	1.27	- fix state arg prototype.
64	root	1.23
65	root	1.22	1.7 Wed Sep 27 17:29:15 CEST 2006
66	root	1.26	- remove bogus "unlzf" patch.
67	root	1.20	note to self: never accept well-meant patches.
68	root	1.21	- make lzf more robust in presence of padding bytes or sudden eof.
69	root	1.20
70	root	1.18	1.6 Fri Jul 7 17:31:26 CEST 2006
71			- the lzf example utility will now uncompress if invoked
72			as "unlzf" (patch by Scott Feeney).
73			- add CHECK_INPUT option that adds more checks for input
74			data validity.
75			- help applications that do not pass in the correct length
76			(such as php) by returning either EINVAL or E2BIG.
77	root	1.19	- default HLOG size is now 15 (cpu caches have increased).
78			- documentation fixes.
79	root	1.18
80	root	1.16	1.51 Thu Apr 14 22:15:46 CEST 2005
81			- incorporated C♯ implementation of both the en- and decoder,
82	root	1.43	written by "Oren J. Maurice".
83	root	1.17	You can find it in the cs/ subdirectory.
84	root	1.16	- make FRST, NEXT IDX overridable if lzf_c.c is directly included
85			in the code.
86
87	root	1.15	1.5 Tue Mar 8 20:23:23 CET 2005
88			- incorporated improvements by Adam D. Moss,
89			which includes a new VERY_FAST mode which is
90			a bit slower than ULTRA_FAST but much better,
91			and enabled it as default.
92	root	1.12
93	root	1.13	1.401 Thu Mar 3 18:00:52 CET 2005
94	root	1.12	- use cstring in c++, not string.h.
95	root	1.14	- change of contact address.
96	root	1.12
97	root	1.11	1.4 Wed Dec 15 08:08:49 CET 2004
98	root	1.10	- very very slight tuning of the hashing function.
99
100	pcg	1.9	1.3 Thu Mar 25 15:41:17 CET 2004
101			- changed license of lzf core code to explicitly allow
102			relicensing under the GPLv2.
103	pcg	1.8	- added VPATH support as suggested by Björn Eriksson.
104
105	pcg	1.6	1.2 Mon Dec 29 13:47:28 CET 2003
106			- avoid spurious memory accesses after the to-be-compressed
107			memory region. originally reported by Michal Zalewski.
108	pcg	1.7	- flip LZF_STACK_ARG meaning (to be correct).
109	pcg	1.6
110	pcg	1.5	1.1 Tue Dec 23 05:48:32 CET 2003
111	pcg	1.4	- removed #warn directive, it's not worth the hassle.
112	pcg	1.5	- add LZF_STACK_ARG and AVOID_ERRNO configurations
113			for embedded systems.
114			- make it compile cleanly as c++.
115			- some small documentation and code fixes.
116	pcg	1.4
117	root	1.3	1.0 Sun Nov 17 12:37:37 CET 2002
118	root	1.2	- slightly better compression ratio, almost unmeasurably
119			slower.
120	root	1.3	- some documentation fixes.
121	root	1.2
122			0.4 Thu Jun 13 14:11:10 CEST 2002
123	root	1.1	- typoe fix.
124			- lzf demo program now properly decompresses small files.
125			- fix another 64 bit issue, found by Laurent Deniel.
126
127			0.3 Tue Jan 16 13:21:14 CET 2001
128			- fix silly beginners 32/64 bit mistake.
129
130			0.2 Thu Jan 4 05:56:42 CET 2001
131	root	1.3	- now totally independent of autoconfig, for
132	root	1.1	easy inclusion into other programs.
133			- much better fine-tuning, faster and better than 0.1.
134
135	root	1.3	0.1 2000
136	root	1.1	- initial release.